# CNC Lathe Turned Brass Parts for Medical Devices

Category: Precision CNC Machined Parts
URL: https://www.machined-parts-factory.com/products/precision-cnc-machined-parts/cnc-lathe-turned-brass-parts-for-medical-devices/

These are CNC lathe turned brass parts for medical devices and equipment, such as medical gas fittings, valve stems, connector bodies, adjusting knobs and instrument bushings. They are held to about ±0.01 mm on critical features and finished with nickel or chrome plating, polishing or other treatments. Orders start at one piece. They suit medical equipment makers needing precise, clean brass components.

- Critical features held to about ±0.01 mm
- Burr control and cleaning before plating
- Lead-free brass grades when required
- Material certificates support traceability

## Specifications
| Spec | Value |
|---|---|
| Process | CNC turning, live-tool milling, cleaning |
| Materials | Brass C36000, H59; lead-free brass on request |
| Tolerance | ±0.01 mm on critical features; ±0.05 mm general |
| Surface Finish | Nickel or chrome plating, polishing, grinding, sandblasting |
| Typical Parts | Gas fittings, valve stems, connector bodies |
| MOQ | 1 piece; prototypes through mid-volume |
| Drawing Formats | STEP, IGES, X_T, STL, DWG, DXF, PDF |
| Lead Time | Prototypes typically 3–7 working days; production 10–20 |
| Inspection | First-article, in-process and CMM checks; reports on request |

## How we make it
Medical brass parts are turned on CNC lathes with careful control of burrs and surface finish, since particles or sharp edges can affect seals and safety. Threads for gas fittings are cut to standard forms and checked with gauges. Cross holes and flats are added with live tooling. Parts are cleaned after machining to remove oils and chips before plating or packaging.

Brass offers good machinability and corrosion resistance and is common for medical gas and fluid fittings. Nickel or chrome plating improves cleanability and appearance; lead-free brass grades are available when regulations require. Other options include polishing, grinding, sandblasting and heat treatment for selected materials. For implantable or patient-contact parts, stainless steel or titanium are typically specified instead.

Critical dimensions are measured on every part, threads are checked with gauges, and surface finish can be measured with roughness testers. Material certificates and inspection reports are available, supporting the buyer's traceability needs. Typical uses include medical gas outlets, flowmeter parts, regulator components, hospital bed adjusters, dental equipment fittings and instrument bushings.

## FAQ
### Is brass acceptable for medical device parts?
Brass is widely used for non-implant medical equipment such as gas fittings, valves and connectors, often with nickel or chrome plating. It is not used for implants or long-term patient contact, where stainless steel or titanium are preferred. Check your device's regulatory requirements.

### Can you provide traceability for medical parts?
We can provide material certificates and inspection reports for each batch, which support your device documentation. We operate under ISO 9001. If you need specific labeling or batch records, tell us at the quote stage so we can include them.

### How do I get a quote for cnc lathe turned brass parts for medical devices?
Send a 3D model (STEP or IGES) and a 2D drawing with tolerances, material, finish and quantity through the quote form or by email. An engineer replies within 24 hours on business days with price, lead time and any DFM suggestions.

Request a quote: https://www.machined-parts-factory.com/contact/#rfq — inquiry@machined-parts-factory.com — WhatsApp +86 176 2154 1688